KX Pb-1 10" Big Blue Carbon Block

MATRIKX® + Pb1 is a powerful, multifunctional filter cartridge for residential and commercial water treatment systems. Heavy Metals Reduction MATRIKX® + Pb1 extruded activated carbon filters reduce soluble lead using an ion-exchange filter medium with high specificity for soluble lead. Particulate filtration is used to intercept insoluble lead-containing particles. Chemical Adsorption MATRIKX® + Pb1 filters offer high levels of chemical reduction in potable drinking water, including chlorine taste and odor. Particulate, Cyst and Turbidity Reduction MATRIKX® + Pb1 filters meet NSF/ANSI Standard 53, Turbidity and Cyst Reduction, including Cryptosporidium, Giardia, Entamoeba and Toxoplasma. Graded-density filtration combined with high dirt capacity extruded activated carbon provide several times greater life than molded filters.

Part No.:06-425-200-975

Length:4.25” x 9.75”

Weight:3.20 lbs.

Chlorine Taste & Odor Reduction Capacity at Flow>20,000 gal. @ 2.50 GPM

Nominal Micron Rating: 0.5 µm

Lead Reduction @ Flow: 8,000 gal. @ 2.50 GPM

Initial Differential Pressure:7.0 psid @ 2.5 GPM

NOTES

1. Performance of a given MATRIKX® extruded carbon filter varies in direct proportion to the total weight of carbon in each filter. For example, a 4.25” O.D. x 20” L MATRIKX® filter contains approximately seven times as much activated carbon as a 2.50” O.D. x 9.75” L MATRIKX® filter, and will therefore have seven times the rated chlorine taste and odor and lead-adsorption capacities when operated at seven times the rated flow of the smaller cartridge. Hence, rated flow is based on maintaining identical contact/residence times for all filters.

2. Projected chlorine taste and odor reduction when tested in accordance with NSF/ANSI Standard 42 protocol. 3. Nominal particulate rating (0.5 µm) is for >85% of a given size as determined from single-pass particle counting results.*

4. Absolute particulate rating (1 µm) is for >99.9% of particles of a given size as determined from single-pass particle counting results.**

*Nominal Filter Rating: Filter rating indicating the approximate size particle, the majority of which will not pass through the filter. It is generally interpreted as meaning that 85% of the particles of the size equal to the nominal micron rating will be retained by the filter. (WQA Glossary of Terms, Third Edition, 3-97).

** Absolute Filter Rating: Filter rating meaning that 99.9% (or essentially all) of the particles larger than a specific micron rating will be trapped on or within the filter. (WQA Glossary of Terms, Third Edition, 3-97).

WARNINGS:

Maximum Operating Temperature: 125°F

Maximum Operating Pressure: 250 psig

Maximum Differential Pressure: 100 psid

Collapse Pressure: 200 psid

MATRIKX® filters are not to be autoclaved or steam-sterilized.

Use this MATRIKX® + Pb1 carbon filter only with microbiologically safe and adequately disinfected water, as it is not designed to kill or remove bacteria or viruses.

Actual results obtained will vary with various combinations of organic contaminants, changes in pH or other conditions encountered in actual use.

All information presented here is based on data believed to be reliable. It is offered for evaluation and verification, but is not to be considered a warranty of any kind. MATRIKX® filters are designed to fit most standard household and commercial or industrial housings.

Contact KX Industries, L.P. to check filter housing compatibility.

This cartridge must be placed in an appropriate housing and flushed for a minimum of 5 minutes prior to use.