Aquatec 550 Series 3.2 GPM

3.2 GPM; 60 PSI; 1/2" F; 120V CHORD

These pumps are designed for intermittent duty, though most models can be run continuously for hours at a time. They are commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required. These pumps can be controlled by either a pressure switch (“demand” mode) or an external power control device (“delivery” mode). When required, an integrated bypass can be incorporated to help regulate pressure levels.

Typical Application Water Treatment/RO Beverage/Foodservice(*) Distillation Equipment Agricultural Spraying General Industrial Automotive

Technical Specifications
POWER: Available motors from 12VDC to 230VAC, energy requirements between 25W-100W
(depending on flow, pressure). Can be used with compatible transformers and/or DC power supplies, to be ordered separately. Standard terminations are 12”, stripped end leadwires. Connectors and power cords are also available. ENVELOPE DIMENSIONS: Approximately 3”x 4”x 7”, weighing 6 lbs. MOUNTING: All positions. Standard offering is a steel mounting base with four hollow rubber grommets. CONTROL OPTIONS: Internal Bypass (20-200 psi), Pressure Switch (40-100 psi) FITTINGS: 5800 Series options include built-in 3/8”, 1/4", or 5/16” John Guest half cartridges. 7800 Series options include 3/8” or 1/2" hose barb, quick connect fittings. For additional information on fittings, please refer to page 21.