Blue-White Peristaltic pump design does not have valves that can clog requiring maintenance.
Self priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock or lose prime.
Outputs to 5.17 GPH (19.56 LPH).
Output pressures to 100 PSI.
Output volume is not effected by changes in back pressure.
Patented pump tube design installs easily and stays centered on the rollers without manual adjustment.
Two pump tubes supplied with each pump. No extra tubing required.
4 operating modes; manual on time per cycle adjustment, pulse input batching, 4-20mA on time per cycle adjustment, and 0-10v DC on time per cycle adjustment.
Repeating interval on-time cycle timer is programmable in seconds, minutes, hours and days resulting in near infinite turndown ratio. Example: 5 seconds on per 10 day cycle.
On time per cycle can be controlled via 4-20mA signal. Note: 20mA must equal maximum pump output.
Digital interval timer results in high frequency of small injections per minute.
Durable housing of chemical resistant Valox (PBT) plastic.
Blue-White A-100NE Peristaltic Metering Pumps