Inline 10-SS

Made completely from stainless steel and fitted with push-fit connections for ease of installation, the attractive, robust, and easy to use HIS unit is designed to be fitted to the cold water pipe underneath the kitchen counter. It can either be used to filter all cold water running into the kitchen sink, or to provide filtered drinking water via a separate faucet or three-way faucet.

The HIS Push-Fit is fitted with one filter candle. As standard, the HIS Push-Fit takes filter candles which are 10 inches long, 2 inches in diameter, with a short mount. Both inlet and outlet are 3/8 inch push fit connections suitable for 3/8 flexible plastic pipe. A DIY kit is available with the HIP filter to enable easy fitting via a line piercing valve to 15mm copper pipes without the services of a plumber. The HIP DIY kit also provides all the fittings needed to install a separate drinking water faucet. For any other sizes of pipe or non copper pipes, a plumber or specialised installer should be consulted. When fitted with Sterasyl™ filter candles, the HIS Push-Fit will produce a flow rate of approximately 300 litres per hour at 3 bar pressure. The HIS Push-Fit can be fitted with Sterasyl™, Carbosyl™, Supercarb™, or Ultracarb™ filter candles. The installation instructions provided with the product should always be followed carefully