Aquatec 6800 Low Flow Booster Pump

NOTE: TRANSFORMER NOT INCLUDED

Outstanding toughness, durability

Designed for 30,000+ operating hours

Adjustable pressure boost between 40-120 PSI

Outlet pressures up to 160 PSI

EMI/RFI electronic noise suppression

Extremely quiet operation, less than 45 DBA

Expels trapped air, eliminates “air locks”

Runs dry without damage

Pumphead can be mounted up or down

Self-priming, 60 inch lift

Improved venting system removes moisture

Low voltage (12-24V) for maximum safety

Corrosion resistant exterior

Technical Specifications

Power: 24 Volt A/C requires separate Aquatec Transformer

POWER: The 6800 Series pumps operate safely with low energy (24 watts), low voltage (12-24V) motors. They can be used with compatible transformers offered in the most popular worldwide voltages (100 VAC, 120 VAC, 230 VAC).

All transformers are optional and must be ordered separately.

MOUNTING: A steel mounting base plate is included at no additional cost. A “universal” baseplate (P/N 51-104) is optionally available at no additional cost.

FITTINGS: Built-in 3/8” John Guest half-cartridge fittings eliminate the need for external fittings (unless elbow fittings are required). Optional fittings, available at no additional cost, include: 3/8” Jaco straight fittings, 3/8” Jaco elbow fittings, or 8mm stem adapters for metric tubing. Note that the location and positioning of these pumps may affect their performance.

Please contact your Aquatec distributor for recommendations to optimize your system.