Commercial Plus 800-1000 gpd Reverse Osmosis System

Note: Adjustabe waste and recycle valve are included is Compact Plus Reverse Osmosis systems purchased with optional Dual Flow Meters only!
Systems without flow meters have a fixed product and waste setup providing 33% recovery.

Compact design requires minimal installation space
Designed for municipal/tap water source
Quality components utilized for system construction
Designed for optimum water recovery
Adjustable waste and recycle flow controls
Quick and easy system installation
Available for pressure or open tank applications
12 Month (One Year) Factory warranty
Output Production: 150 gpd to 800 gpd
Standard features include:
TFC membrane, PVC housing
Thin film composite membrane
PVC membrane housing
Powder-coated steel frame
Inlet and outlet pre-filter gauges
Liquid-filled system pressure gauge
Pressurized tank pressure gauge
Adjstbl. waste/recycle valves
High-pressure nylon tubing
High-pressure brass comp. fittings
Storage tank pressure switch
Low-pressure switch
Feed water inlet solenoid valve
1/2 hp 50/60 hz motor (150-450gpd)
3/4 hp 50/60 hz motor (800gpd)
Rotary vane pump
20" 5 micron sediment pre-filter
20" carbon block pre-filter
Salt rejection 95 - 99%

FEED WATER PARAMETERS:
Temperature 85 Deg. F maximum, Pressure 40 - 80 psi maximum, TDS 2000 ppm maximum. If higher, consult factory, Iron tolerance 0.5 ppm maximum, Hydrogen sulfide must be removed, Silica tolerance can not be higher than 125 ppm in the concentrate stream. Antiscalant should be considered for any levels over 75 ppm. Turbidity should be removed, Hardness over 10gpg should be softened.

Dimensions: 21" (length) X 16" depth X 18" height
Weight: 65 lbs.
Flow: 800-1000 gpd
Membrane: 4" by 21"
Power: 110 or 220 volt (must specify when ordering), 60 Hz, Single Phase
Recovery: 50% (1 gallon of product to 1 gallon waste)


Options:
Float switch for atmospheric storage tank
Product and waste flow meters
Stainless steel pump
Automatic hourly flush
Stainless steel membrane housing
Manual flush
Additional pre-treatment, see below:
Stainless steel needle valves
220 volt motor