Everpure H104 Replacement Filter Cartridge
The Everpure H104
Drinking Water System
reduces the following
contaminants:
Lead
Asbestos fibers
Cysts such as
Giardia lamblia,
Entamoeba histolytica
and Cryptosporidium
parvum
And the following
substances:
Chlorine taste
and odor
Dirt and cloudiness*
Mold and algae*
Oxidized iron*
Oxidized manganese*
Oxidized sulfides*
Particles 1/2 micron
and larger in size
• Replacement Filter Cartridge for H104 System.
• Reduces up to 99% of lead. Exclusive precoat design reduces up to 99.99% of particles 1/2 micron and larger in size including Cyptosporidium. Reduces asbestos fibers, dirt, chlorine taste and odor, mold and algae.
• Scale inhibitor blended into the Micro-Pure® material reduces mineral build-up in water using appliances.
• Replacing the cartridge is sanitary and as easy as changing a light bulb.
• Capacity: 1,000 gallons (3,785 L)
• Flow Rate: 1/2 GPM
• Certifications: NSF 42, NSF 53
• Pack Size: 1
Features
Finely polishes treated water to premium quality for drinking and cooking.
Reduces chlorine taste and odor.
Reduces dirt, rust, asbestos fibers and other particulates such as oxidized iron, manganese and sulfides.
Reduces parasitic protozoan cysts such as Giardia, Entamoeba, Cryptosporidium.
Reduces common earthy, moldy, fishy tastes and odors.
Reduces lead to below the Federal Action Level.
Inhibits limescale build-up in water-using appliances — as tested by Everpure.
Health Claim Performance Certified by NSF/ANSI*
This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving
the system, as specified in NSF/ANSI 42 and 53.
Influent Challenge Max. Permissible Product Reduction Minimum Average Substance Concentration Water Concentration Requirements Reduction Reduction
Standard 42-Aesthetic Effects, Chlorine 2.0 mg ± 10% – >_ 50% – 96.8%
Particulate, Class I
Particles 0.5 - <1 μm at least 10,000 particles/mL – >_ 85% – 99.9%
Standard 53-Health Effects, Asbestos, Cyst, Turbidity, Lead,
*Tested using flow rate=0.5gpm; pressure=60 psig; pH=7.5 ±0.5; temp.=20°C ±2.5ºC †NTU=Nephelometric Turbidity Units
|