Everpure H-300+M Factory Replacement Cartridge

• Replacement Filter Cartridge for H-300+M System with filter replacement monitor.

• Reduces Volatile Organic Chemicals and 99% of lead. Exclusive precoat design reduces up to 99.99% of particles 1/2 micron and larger in size including Cyptosporidium. Reduces asbestos fibers, dirt, chlorine taste and odor, mold and algae.

• Scale inhibitor blended into the Micro-Pure® material reduces mineral build-up in water using appliances.

• Replacing the cartridge is sanitary and as easy as changing a light bulb.

• Capacity: 500 gallons (1,892L)

• Flow Rate: 1/2 GPM

• Certifications: NSF 42, NSF 53

• Pack Size: 1

This drinking water system must be maintained according to the manufacturer's instructions, including replacement of filter cartridges. The substances reduced or removed by this system are not necessarily in your water. Read the performance data sheet.

flow rate Controlled at 0.5 gal./min. (1.9 L/min.)

temperature 35-100°F (2-38°C) Cold water use only

pressure 10-125 psi. (0.7-8.6 bar), non-shock

capacity 500 gal. (1,892 L)

everpure warranty

Everpure Drinking Water Systems are warranted to be free of defects for a full twelve (12) months after purchase. A detailed warranty statement is provided with each system.

The Everpure H-300+M Drinking Water System reduces the following contaminants:

> Lead

> Asbestos fibers

> Cysts such as Giardia lamblia, Entamoeba histolytica and Cryptosporidium parvum

> Volatile Organic Chemicals (VOCs), including THMs And the following substances:

> Chlorine taste and odor

> Dirt and cloudiness*

> Mold and algae*

> Oxidized iron*

> Oxidized manganese*

> Oxidized sulfides*

> Particles 1/2 micron and larger in size

The H-300+M delivers bacteriostatic control.**

 Everpure Manual