home
Home
About Us
My Account
Contact Us
Hello Guest,
Login
QUESTIONS? CALL US TOLL FREE
monday-friday : 8am-5pm pst
888.426.9488
View Cart
0 item(s)
Check Out
$0
Shop By Brand
Best Sellers
New Arrivals
Clearance
> ILS-0125 Stainless Steel 28-48 gpm Separator
ILS-0125 Stainless Steel 28-48 gpm Separator
ILS-0125 Stainless Steel 28-48 gpm Separator
Item #:
ILS-0125
Price
Your Price:
$1,284.40
Reg Price:
$1,482.00
You Save:
$197.60
(13%)
Quantity
Add to Cart
Availability: Usually ships the next business day
Review this item
Add to Gift Registry
Manufacturer
Lakos
Material :
Stainless Steel
Availability:
Usually ships the same business day
Product Overview
Customer Reviews
Details
Product Category
Suggested Accessories
Pipe-size :
Availability:
Pipe Size
No moving parts to wear out
The case and internals are made from 316 stainless steel.
This eliminates mechanical failures and troublesome replacement parts.
No screens, cartridges, cones or filter elements to clean or replace
Saves labor, reduces downtime and eliminates the ordering and stocking of spare parts.
No backflushing
Minimizes water/liquid loss. Zero liquid loss options available.
No downtime requirements
All units are designed to operate continuously with no routine shutdowns for cleaning or maintenance. Purging of separated solids may be performed during full operation with no loss of performance.
Low pressure loss
Consistent with the systems flow rate, ILBSeparators typically require no more than 5-12 psi (0.3 - 0.8 bar) loss for effective solids removal without troublesome pressure fluctuations.
Available in two standard materials of construction
ILB Separators are available in either carbon steel or stainless steel. Each has distinct qualities with regard to corrosion, pressure and cost.
ILB Separators. The simple, easy-to-use solution for a wide variety of solids-from-liquids problems.
Separator Details
The case and internals are made from 316 stainless steel.
A. Inlet & outlet shall be male, NPT, size: 1-1/4
B. Purge outlet shall be male, NPT, size: 3/4
C. The separator shall operate within a flow range of: 3-6 gpm
D. Pressure loss shall be between 5-12 psi (0.3 - 0.8 bar), consistentwith the above flow range.
* Please refer to images above for the Dimensions.
Separator Type & Performance
The removal of specific unwanted solids from a pumped/pressurized liquid system shall be accomplished with a centrifugal-action vortex separator. Solids removal efficiency is principally predicated on the difference in specific gravity between the solids and the liquid. Performance is expected to be 98% removal of 74 microns and larger, with significant particle removal of finer particles also likely.
Performance Requirement
Separator performance must be supported by published independent test results from a recognized and identified test agency. Standard test protocol of upstream injection, downstream capture and separator purge recovery is allowed with 50-200 mesh particles to enable effective, repeatable results. Single-pass test performance must not be less than 95% removal. Model tested must be of the same flow-design series as specified unit.
Separator Design & Function
A tangential inlet and mutually tangential internal accelerating slots shall be employed to promote the proper velocity necessary for the removal of the separable solids. The separator s internal vortex shall allow this process to occur without wear to the accelerating slots.
Separated particle matter shall spiral downward along the perimeter of the inner separation barrel, in a manner that does not promote wear of the separation barrel, and into the solids collection chamber, located below the vortex deflector stool.
System liquid shall exit the separator by following the center vortex in the separation barrel and spiral upward to the separator outlet.
Limited Five Year Manufacture Warranty
Sand Separators
1 1/4"
Usually ships the same business day
Sand Separators
1 1/4"
Recently Viewed Items
Information
Browse By Category
Browse by Price
$0 - $24.99
$25 - $49.99
Over $50
New Releases
Top Sellers
Quick View