The stainless steel SandMaster™ Plus doesn't just filter sand from your water...is separates it with centrifugal action. Your faucet aerators stay clean, your appliances, water heaters, and sprinklers can operate at peak efficiency.
Unlike other sand removal methods, the Sandmaster Plus has no dirty filters to clean or flush accumulated sand out of the system. Simply open the purge valve to flush accumulated sand out of the system.
Or automate the flushing cycle with the reliable PurgeMaster - a battery operated automatic flushing device.
DO NOT OVERSIZE SANDMASTER SYSTEMS. OVERSIZING WILL RESULT IN TOO LOW OF A FLOW RATE FOR CENTRIFUGE TO FUNCTION PROPERLY! THE SYSTEM INLET/OUTLET IS INTENTIONALLY DESIGNED TO BE SMALLER THAN YOUR SYSTEM PIPING TO INCREASE VELOCITY THROUGH THE SAND SEPARATOR.
Inlet/Outlet: 1 1/2"
Purge connection size: 3/4" male NPT
Max system pressure: 100 psi (6.9 bar)
Max temperature: 120° F (49° C)
Height: 24-3/4" (629 mm)
Diameter: 6" (152 mm)
Construction: 14 gauge Stainless Steel Outer Shell, Plastic Internals
5 Year Limited Warranty
Economical One Time Cost - No Filters To Change