Big Brand 1000 Series Filters - 100% Pure Polypropylene, Zero additives!
Big Brand Water Filter high capacity spun 100% purepolypropylene filters are made from FDA approved pure polypropylene resin. These filters contain no silicone or lubricants like string wound filters. Big Brand spun poly filters feature a unique thermally bonded microfiber construction process. The result is a high capacity pure polypropylene bacterially resistant filter all at a very reasonable price! These filters have more bacterial resistance than our high capacity pleated filters above.
Description and Use
1000 Series LD Filters combine innovative depth filter technology, quality cost effectiveness to provide excellent filtration value in residential and light commercial applications.
Expanding its Product Line
Big Brand Water Filter, Inc. is continuing to expand its product line to meet current market demand with the introduction of our new large diameter (LD) filter. Manufactured with our worldrenowned Meltblown Microfibers Technology, the engineered gradient density feature of this cartridge provides exceptional dirt-holding capacity and unequaled life compared to our equivalent rated standard filters. The LD filter, with its three to eight times greater dirt-holding capacity and life, will reduce change-out frequency, adding more value in applications where high capacity and infrequent change-outs are desired. This product is ideally suited to be used in AMETEK's Big Blue and Keystone's Blue Giant housing units. (Blue Blue is a trademark of US Filter/Siemens. Blue Giant is a trademark of Metpro Keystone Filter Division.) The LD filter has pure FDA compliant polypropylene construction, and is manufactured using ISO 9001 certified process.
Whole House Filtration
Spa and Pool Filtration
Restaurant and Food Service
High Dirt-Holding Capacity
True-graded density of the extended media captures particles throughout entire filter depth
High dirt-holding capacity means longer life and fewer change-outs, which translates into money saved
Precision final filter results in consistent highperformance filtration
Large media area allows for high flow rates (Maximum recommended flow rate is 10 gpm for 10, 20, 30, and 50 microns, 5 gpm for 1, and 5 microns per 10-inch length. Change-outs recommended at 25 psid)
Pure Polypropylene Construction
Thermally-bonded microfibers for positive dirt retention
High-purity polypropylene media has no wetting agents, solvents, antistatic agents or binders
Wide chemical compatibility
Temperatures to 150ºF
Meets the requirements of the FDA Title 21 of The Code of Federal Regulations 174.5 and relevant subparts of 177.
Proven Manufacturing Process
Automated, consistent manufacturing process ensures reliable performance and repeatable results
Large diameter filter manufacturing is ISO 9001 certified assuring continuous product quality
Material and FDA Compliance
1000 Series LD large diameter cartridge filters are made from thermally-welded blown microfibers of polypropylene. Big Brand Water Filter, Inc. certifies that the resin used for manufacturing the filter media of this product meets the requirements of the Food and Drug Administration (FDA) Title 21 of the Code of Federal Regulations (CFR) 174.5 and relevant subparts of 177.
Important Notice To User:
The following is made in lieu of all other warranties expressed or implied. Manufacturer’s and Seller’s only obligation shall be to issue credit against the purchase or replacement of the product proved to be defective in material or workmanship. Neither Manufacturer nor Seller shall be liable for any injury, loss or damage, direct or indirect, special or consequential, arising out of the use of, misuse, or the inability to use such product. The information contained herein is based on technical data and tests which we believe to be reliable and is intended for use by persons having technical skill at their discretion and risk. Since conditions of use are outside Big Brand Water Filter, Inc.’s control, we can assume no liability whatsoever for results obtained or damages incurred through the application of the data presented. This information is not intended as a license to operate under, or a recommendation to infringe upon, any patent of or others covering any material or use. The foregoing may not be altered except by a written agreement signed by officers of the Manufacturer.