Big Brand Z-Tech Absolute Rated Membrane Filtration
| Absolute Rated Polyethersulfone Membrane
Pleated Filter Cartridges This pleated, disposable filter element is constructed of absolute rated, hydrophilic, asymmetric polyethersulfone membrane with extended filter area to allow for a high system flow rate. At the same time optimal flux rate per square foot of filter media is maintained. Filter Features – Benefits • 5.5 or 7.0 square feet of membrane surface are per 10" element – High throughput – Longer on-line service reduces costly maintenance time • Absolute rated membrane from 0.1 to 0.65 ìm • Meets USP 24 Class VI biological test for plastics • Fixed pore construction eliminates dirt unloading as differential pressure increases • Low extractables Filter Specifications Media: Asymmetric Polyethersulfone membrane Inner core, end caps, cage: Polypropylene Gaskets/O-Rings: Buna-N, EPR, Silicone, Viton, Teflon Encapsulated Viton O-Rings Micron ratings: 0.1, 0.2, 0.45, 0.65 ìm Dimensions Nominal lengths: 9.75’’ 10’’, 20’’, 30’’, 40’’ (24.7, 25.1, 50.8, 76.2, 101.6 cm) Outside diameter: 2.7’’ (6.9 cm) Inside diameter: 1.0’’ (2.54 cm) Surface area: 5.5 or 7 sq. ft.– 10 inch element Maximum operating temperature: 176°F (80°C) Maximum differential 80 psid @ 70°F (5.5 bar @ 21°C) pressure: 40 psid @ 176°F (2.8 bar @ 80°C) FDA listed materials All polypropylene material used in manufacturing complies with the regulations of the Food and Drug Administration (FDA) title 21 of the Code of Federal Regulations Sections 174.5, as applicable for food and beverage contact. Applications • Food & Beverage • Filtration of acids, • Cosmetics solvents and bases • Chemicals • RO Prefilter • Aqueous solutions • Ultra pure water • Ink Performance Specifications Hot DI Water Filter cartridge will withstand temperatures of 203°F (95°C) for brief periods of time. Chemical Compatibility Filter cartridge resists most acids and bases, pH 1–14 and most oxidizing agents. Sanitizing Agents Filter cartridge may be sanitized in place with common oxidizing agents. Sterilize Autoclavable @ 126°C for one hour. (Requires insert). |


