The ABVA requires a 4-way air solenoid valve (Part # 8345G1), and ABVS requires a 3-way air solenoid valve (Part # 8320G13) to control actuation. Compressed air should be filtered and lubricated. The hex nuts used to mount the actuator are tapped to facilitate piping support.

Manual Override
Series ABVA and ABVS have direct override to the ball valve shaft. Series ABVS requires simple loosening of the spring prior to manual override.

Materials of Construction
Actuator is constructed of corrosion resistant thermoplastics. Seals are Buna-N. For optional materials, please consult factory.