Aquatec 0.7 gpm Demand Delivery Pump

Pump comes pre wired with 110 VAC power chord, Built in 3/8 Qconn fittings.

.7 GPM flow @ 60 psi 3/8 JG 120 volt with chord.

.54 GPM @ 70 psi to .90 GPM @ 5 psi

7 - 11 foot prime ( Depending on Pump Head )

The 5800 Series pumps are typically used to either a)Draw water from a holding tank and pressurize it, or b)Boost pressure from a low pressure source. Although designed to operate intermittently, most models can run continuously for several hours at a time. These pumps are operated in demand mode (built in pressure switch included set at 60 psi).