Big Brand 1HP Whole House Pressure Booster 220V

Big Brand Water Filter whole house booster pumps are more reliable and have far more flexibility than any other pump of this type on the market.

First off the pressure switch is adjustable for when the pump turns on. This allows you to make the pump operate according you your conditions. Maybe you have an atmospheric storage tank and just a few psi. The switch can be adjusted for that. In addition there is a built in flow switch that turns on when flow is greater than 0.7 gpm, then shuts off when flow is below 0.3 gpm. This switch is adjustable also.

Finally we put the air valve for the bladder tank where it is most convenient on the end of the pump so you can adjust the tank to just below your incoming line pressure to be most effective.

Optionally you can install an external bladder tank to reduce pump cycling and continuous running. This can save electricity and reduce wear on the pump.

Max inlet pressure (53 psi)

Max Pump pressure (67 psi)

Total pressure with 53 psi inlet plus 67 psi boost is 120 psi. We do not recommend pressures above 100 psi. To run a 53 psi inlet with this pump it is only recommended for higher flow rate applications.Preset Inlet pressure ( 36 psi )

Flow rate avg. ( 15 to 21 gpm @ 45-65 psi )

Please review the PB-100 manual download in the manuals tab.