1-1/4" E-3 NPT Water Pressure Regulator

The E-3 solves the problems of water hammer, pipe noise and rapid wearing of fixtures, faucets, and valves. Brass body, threaded connections, stainless steel body seat, BUNA-N diaphragm and seat washer. Gives years of dependable service on hot (to 180•F [82•C]) or cold water. Large inbuilt stainless strainer with separate cleanout plug. Good capacity for homes. 300 psi maximum inlet pressure; standard factory setting 45 psi.
DESCRIPTION
The Cash Acme E-3 Pressure Reducing and Regulating Valve automatically reduces a high inlet pressure to a lower delivery pressure and maintains the lower pressure within acceptable limits.
The Cash Acme E Series 3 provides substantially higher capacity and closer regulation for more demanding and higher quality installations.
The Cash Acme E Series 3 is designed for use where supply line inlet pressure does not exceed 300 psi and is suitable for either cold or hot (to 180•F) water service for a variety of applications. Standard factory outlet setting is 45 psi: other settings are available per the spring chart.
The Cash Acme E-3 incorporates a yoke-type design, allowing the regulator to close against the inlet pressure and provide quieter operation under wide and varying flow conditions.
FEATURES AND BENEFITS
Automatically reduces a high inlet pressure to a lower delivery pressure:
Maintains a lower pressure within reasonably close limits.
Every valve is tested for performance prior to shipping:
Specify and install with confidence!
Solves problems of water hammer, pipe noise and rapid wearing of fixtures, faucets and valves:
Longer life of the valve saves money and time!
Listed by ASSE 1003 and IAPMO:
Inspector friendly, peace of mind!
A pressure reducing valve shall be installed to deliver water at a controlled pressure. The valve shall be ASSE 1003 and IAPMO listed. The valve shall be a bronze body with a maximum inlet pressure of 300 psi. The valve shall have a separate cleanout plug that houses a Monel strainer screen. The valve shall be a yoke-type design with a buna seat disc and a stainless steel body seat. The valve shall be a Cash Acme E-3 Pressure Regulating Valve.