Big Brand 1000 Series Filters - 100% Pure Polypropylene, Zero additives!
Big Brand Water Filter high capacity spun 100% purepolypropylene filters are made from FDA approved pure polypropylene resin. These filters contain no silicone or lubricants like string wound filters. Big Brand spun poly filters feature a unique thermally bonded microfiber construction process. The result is a high capacity pure polypropylene bacterially resistant filter all at a very reasonable price! These filters have more bacterial resistance than our high capacity pleated filters above.
Description and Use
1000 Series LD Filters combine innovative depth filter
technology, quality cost effectiveness to provide
excellent filtration value in residential and light
commercial applications.
Expanding its Product Line
Big Brand Water Filter, Inc. is continuing to
expand its product line to meet current market
demand with the introduction of our new large
diameter (LD) filter. Manufactured with our worldrenowned
Meltblown Microfibers Technology, the
engineered gradient density feature of this cartridge
provides exceptional dirt-holding capacity
and unequaled life compared to our equivalent
rated standard filters. The LD filter, with its three to
eight times greater dirt-holding capacity and life,
will reduce change-out frequency, adding more
value in applications where high capacity and
infrequent change-outs are desired. This product is
ideally suited to be used in AMETEKs Big Blue and
Keystones Blue Giant housing units. (Blue Blue is a
trademark of US Filter/Siemens. Blue Giant is a
trademark of Metpro Keystone Filter Division.) The
LD filter has pure FDA compliant polypropylene
construction, and is manufactured using ISO 9001
certified process.
Typical Applications
Whole House Filtration
Spa and Pool Filtration
Restaurant and Food Service
Water Filtration
General Properties
High Dirt-Holding Capacity
True-graded density of the extended media
captures particles throughout entire filter depth
High dirt-holding capacity means longer life
and fewer change-outs, which translates into
money saved
Precision final filter results in consistent highperformance
filtration
Large media area allows for high flow rates
(Maximum recommended flow rate is 10 gpm
for 10, 20, 30, and 50 microns, 5 gpm for 1, and
5 microns per 10-inch length. Change-outs
recommended at 25 psid)
Pure Polypropylene Construction
Thermally-bonded microfibers for positive dirt
retention
High-purity polypropylene media has no wetting
agents, solvents, antistatic agents or binders
Wide chemical compatibility
Temperatures to 150•F
Meets the requirements of the FDA Title 21 of
The Code of Federal Regulations 174.5 and
relevant subparts of 177.
Proven Manufacturing Process
Automated, consistent manufacturing process
ensures reliable performance and repeatable
results
Large diameter filter manufacturing is ISO 9001
certified assuring continuous product quality
Material and FDA Compliance
1000 Series LD large diameter cartridge filters are made
from thermally-welded blown microfibers of polypropylene.
Big Brand Water Filter, Inc. certifies that the resin used for
manufacturing the filter media of this product
meets the requirements of the Food and Drug
Administration (FDA) Title 21 of the Code of Federal
Regulations (CFR) 174.5 and relevant subparts
of 177.
Important Notice To User:
The following is made in lieu of all other warranties
expressed or implied. Manufacturer•s and Seller•s
only obligation shall be to issue credit against the
purchase or replacement of the product proved to
be defective in material or workmanship. Neither
Manufacturer nor Seller shall be liable for any
injury, loss or damage, direct or indirect, special or
consequential, arising out of the use of, misuse, or
the inability to use such product. The information
contained herein is based on technical data and
tests which we believe to be reliable and is
intended for use by persons having technical skill
at their discretion and risk. Since conditions of use
are outside Big Brand Water Filter, Inc.•s control, we can assume no liability
whatsoever for results obtained or damages
incurred through the application of the data presented.
This information is not intended as a license
to operate under, or a recommendation to infringe
upon, any patent of or others covering any material
or use. The foregoing may not be altered
except by a written agreement signed by officers
of the Manufacturer.