Element Type LFC3-4040
Min. Salt Rej., %: 99.0
Nom.Salt Rej., %: 99.6
Permeate Flow, GPD: 1,980
Test Conditions
NaCl Solution, PPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1500
Applied Pressure, psig (MPa) . . . . . . . . . . . . . . . . . . . . .225 (1.55)
Operating Temperature, F ( C) . . . . . . . . . . . . . . . . . . . .77 (25 )
Permeate Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15%
pH Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.5 - 7.0
Application Data
Maximum Applied Pressure, psig (MPa) . . . . . . . . . . . . . 600 (4.14)
Maximum Feed Flow, GPM (m3/h) . . 4040-16(3.6), 8-inch -75(17.0)
Maximum Operating Temperature, F ( C) . . . . . . . . . . . .113 (45 )
Feedwater pH Range* . . . . . . . . . . . . . . . . . . . . . . . . . . .3.0 - 10.0
Maximum Feedwater Turbidity, NTU . . . . . . . . . . . . . . . . . . . . .1.0
Maximum Feedwater SDI (15 mins) . . . . . . . . . . . . . . . . . . . . . .5.0
Maximum Chlorine Concentration, PPM . . . . . . . . . . . . . . . . .<0.1
Maximum Ratio of Concentrate to Permeate Flow for Any Element . .5:1
Maximum Pressure Drop for Each Element, psig . . . . . . . . . . . . .10
(m3/d): 7.49)
